NJ 100EN-RE
- Universal Real-Time Ethernet interface (Master or Slave) in the closed IP40 housing
- Host connection via PCI Express
- One hardware for all Real-Time Ethernet protocols
- Simple plug-in installation without tools
The universal Exchangeable Module netJACK with its PCI Express interface addresses in particular the embedded market with high-performance CPUs like Intel Atom®. Alternatively, there are versions with a traditional dual-port memory and a fast serial SPI interface.
All variants have the compact design of a closed IP40 module which can be mounted without using tools. Additional costs for the exchangeable module will not incur because connector and mounting rails are designed as contact areas or cut-outs on the host system.
netJACK can be mounted quickly and easily - right before shipment or later by the end customer.
With netJACK, customers can realize the full range of communication solutions, e. g. for drives, HMI systems, or ident systems. Additional functions, e. g. soft-PLC, visualization or applications developed by the customer are possible, too. For customer-specific requirements, Hilscher offers a cost-optimized Design and Production Service.
Due to the Hilscher network controller netX, a 10-year delivery guarantee is granted.
All variants have the compact design of a closed IP40 module which can be mounted without using tools. Additional costs for the exchangeable module will not incur because connector and mounting rails are designed as contact areas or cut-outs on the host system.
netJACK can be mounted quickly and easily - right before shipment or later by the end customer.
With netJACK, customers can realize the full range of communication solutions, e. g. for drives, HMI systems, or ident systems. Additional functions, e. g. soft-PLC, visualization or applications developed by the customer are possible, too. For customer-specific requirements, Hilscher offers a cost-optimized Design and Production Service.
Due to the Hilscher network controller netX, a 10-year delivery guarantee is granted.
| COMX 100EN-RE | Parameter | Value |
| Communication controller | Type | netX 100 |
| Integrated memory | RAM | 8MB |
| FLASH | 4MB | |
| Ethernet interface | Transmission rate | 100 MBit/s,10 MBit/s (depending on loaded firmware) |
| Half duplex/Full duplex | supported (at 100 MBit/s) | |
| Auto-Negotiation | depending on loaded firmware | |
| Auto-Crossover | depending on loaded firmware | |
| Galvanic Isolation | Isolated | |
| System interface | Type | PCI Express |
| Port type | One-Lane-Port | |
| Frequency | 8/16 Bit | |
| Connector Type | 40 pin connector, SAMTEC FSI-120-03-G-D-AB | |
| Diagnostic Interface | USB | USB+, USB- |
| Power supply | Voltage | +3.3 V ± 5 % DC |
| Power Consumption (typ.) | approx. 746 mA / 2.5 W | |
| Device | Housing | Closed module |
| Protection class | IP40 | |
| Number of pins | 40 | |
| Width / distance of pins | 0.55 mm / 0.45 mm | |
| Mounting | Via milled footprint holes in the carrier board and retaining brackets. No mounting accessories required. | |
| Mounting/pulling cycles | max. 10 | |
| Hot plugging | No |