
NHST-T100-EN
- 可靈活配置為常見現場總線協議、實時乙太網路協議
- 與cifX Card一致的API,易於整合
- 透過網路口進行遠端控制,為沒有PC插槽的設備提供另一個選擇
netHOST LAN 閘道器透過傳統乙太網控制現場總線或實時乙太網系統,不同於cifX Card,他不需要PCI或PCIe等介面,專為僅具備乙太網連接介面的工業PC和嵌入式系統設計,連接到LAN埠後,netHOST即可作為一個自主運行的、功能完善的現場總線或實時乙太網主站,支持週期性和非週期性通信服務。對於Windows系統可使用動態鏈接庫 (DLL),嵌入式系統則可使用C原始碼,其 API 與 Hilscher的PC卡一致,使netHOST如同一張「可遠端控制的PC卡」從而大幅簡化了集成過程。
Communication controller | netX | netX 100 |
Integrated Memory | RAM | 8 MB SDRAM |
FLASH | 4 MB serial Flash | |
Memory card | Type and size | SD card, max. 2 GByte. SDHC- or SDXC-card type must not be used. |
Supply voltage | 24V | |
Maximum Current at 24 V | 130 mA | |
Power supply | Typical power consumption | 3.2 W |
Connector | Mini-COMBICON, 2-pin | |
Reverse voltage protection | yes | |
Requirement to the power supply | For UL conform usage: Device shall be supplied by an isolated voltage source | |
Configuration | Configuration software | SYCON.net、Ethernet Device Configuration Tool |
Altitude | 0 m … 2000 m | |
Dimensions (L x W x H) | 100 x 52 x 70 mm (without connector) | |
Device | Weight | appr. 150 g |
Degree of protection | IP 20 | |
Mounting | on DIN rail EN 60715 |