- One hardware design for all Industrial Ethernet and IIoT networks
- CRA-compliant replacement for COMX 51CN-REwith SPI host interface, no redesign required
- Allows a flexible positioning of the network connector
- IIoT-ready for additional use cases such as condition monitoring or predictive maintenance
- Energy-efficient design with 65% lower power loss
- Harmonized hardware, firmware, and tools for cyber-secure industrial communication
The comX 90 communication module has been designed for integration into field devices to provide network connectivity, for example, to drives or robots. All communication tasks are executed autonomously within the module – independently of the processor of the target device.
Process data is exchanged via an SPI interface. The embedded module combines integrated hardware and software components to meet the requirements of IEC 62443, thereby significantly enhancing cybersecurity at the field level.
comX 90supports all leading Real-Time Ethernet protocols in slave mode and meets all network-specific requirement within a single module.
The integrated Hilscher netX SoC ensures a 10-year delivery guarantee.
Process data is exchanged via an SPI interface. The embedded module combines integrated hardware and software components to meet the requirements of IEC 62443, thereby significantly enhancing cybersecurity at the field level.
comX 90supports all leading Real-Time Ethernet protocols in slave mode and meets all network-specific requirement within a single module.
The integrated Hilscher netX SoC ensures a 10-year delivery guarantee.
| 分類 (Category) | 參數項目 (Parameter) | 規格數值與說明 (Value / Specification) |
| Product | 產品型號 (Model) | COMX 90CN-ECS-IOT |
| 料號 (Part number) | 1592.322 | |
| 簡要描述 (Brief description) | Communication Module SPI (without connector) - EtherCAT SubDevice + IoT | |
| Communication controller | 控制器型號 (Controller) | netX 90 |
| Integrated Memory | RAM | 8 MB |
| FLASH | 8 MB serial Flash | |
| Power supply | 供應電壓 (Supply voltage) | +3.3 V DC ± 5 % |
| 典型/最大電流 (Current) | 195 mA (at 3.3 V) / 200 mA (at 3.0 V) | |
| 典型功耗 (Power consumption) | 650 mW | |
| 電源連接方式 (Power connector) | Via system bus connector X1 | |
| 安全規範要求 (Requirement) | For UL-compliant use: COMX communication modules shall be supplied from limited energy circuit accordance clause 9.4 of UL/CSA 61010-1 3rd ed or Class 2 of UL1310 | |
| System interface | 介面類型 (Type) | Serial dual-port memory interface |
| 連接器 (Connector) | 50-pin SMT connector, socket | |
| 引腳間距 (Pin distance) | 1.27 mm | |
| 雙埠記憶體容量 (Dual-port memory size) | 32 KB | |
| 串列雙埠介面規格 (Interface spec) | SPI Slave, mode 3 | |
| 最高傳輸率 (Baud rate) | max. 50 MHz | |
| Communication interface | 通訊標準 (Standard) | Ethernet (The communication cable connected to COMX communication modules shall be connected to LAN) |
| 介面類型 (Interface type) | 100BASE-TX, potential-free | |
| 自動協商 (Auto negotiation) | supported | |
| 自動跳線翻轉 (Auto cross over) | supported | |
| 連接埠 (Connector) | 2 * RJ45 socket | |
| Diagnostic interface | 介面類型 (Type) | UART |
| 連接方式 (Connector) | Signals at host interface. Available only if integrated in host system. | |
| Display | LED 狀態指示燈 (LED display) | • SYS: System Status (Green: RUN, Yellow: RDY) • RUN (COM0): Communication status (Green) • ERR (COM1): Communication status (Red) • L/A IN, L/A OUT: Ethernet link activity status (Green) |
| Environment | 工作環境溫度 (Operating temperature) | -20 °C ... +75 °C (Air flow during measurement: 0,5 m/s) |
| 儲存環境溫度 (Storage temperature) | -40 °C … +85 °C | |
| 環境濕度 (Humidity) | 10 % … 95 % relative humidity (non-condensing) | |
| 海拔高度 (Altitude) | 0 m … 2000 m | |
| Device | 外觀尺寸 (Dimensions) | 70.0 mm x 30.0 mm x 19.8 mm (L x W x H) |
| 重量 (Weight) | 17.1 g | |
| 安裝方式 (Mounting) | Using screwable metal bolts, according to Design Guide | |
| Configuration | 設定軟體 (Configuration software) | Communication Studio and Device Library |
| 韌體下載 (Firmware download) | Device Explorer | |
| API 支援 | Yes | |
| Conformity & EMC | RoHS 規範 | Yes |
| CE 標誌 (CE sign) | Yes | |
| UKCA 標誌 (UKCA sign) | Yes | |
| 電磁輻射標準 (Emission) | EN 61000-6-4 / BS EN 61000-6-4 | |
| 電磁耐受標準 (Immunity) | EN 61000-6-2 / BS EN 61000-6-2 |